How do you stop a circular saw kickback?

Hazardous kickbacks occur to the very best people, even to knowledgeable carpenters. Knowing what kickback is and how it occurs will assist to prevent them.

Concentrate on 3 areas: correct blade depth, standing and holding the saw properly and keeping the product safely held. Make sure you stop a circular saw kickback.

Before we begin, let’s discuss a couple of security points. Do not ever ignore the serious injuries that a circular saw can trigger. Eye injuries and cuts are the most typical.

Always use shatterproof glass. You simply never know when something is going to fly up in the air. Different products develop all sort of dust and particles that can fly up at any time.

A kickback takes place when the blade of the saw binds in the cut; this triggers the saw to sit back towards the user. The depth of the cut ought to be changed for the blade to extend about 1/4 to 1/2 inch listed below the bottom of the product.

This is the initial step and does 2 things. It reduces the area of the blade that’s in contact with the product, therefore decreasing the required that would be produced from a bind.

The appropriate blade depth also exposes a less quantity of the blade if the saw need to sit back. This will prevent circular saw kickback.

Numerous kinds of circumstances can trigger the saw to bind and sit back. The first circumstance to search for is to make certain that the waste piece has lots of room to fall off and far from the saw.

Another little subtle technique I found out is to not cut uphill when you’re dealing with a sawhorse and other kind of work platform. Cutting uphill can trigger the saw to bind. It is far better to raise the back part of the product so that the saw is really cutting a little downhill.